← Back to all FAQs Card Readers

Why is my Stripe card reader offline?

In the Stripe Dashboard, “offline” means Stripe can’t reach that internet reader (WisePOS E, S700, S710, or T600). Collect can’t connect to it with an Internet scan until it’s back online.

Check these first

  1. The reader is powered on. A smart reader that’s unplugged with a flat battery, or turned off, goes offline. Leaving it powered also lets it take software updates while it’s idle.
  2. Wi-Fi or Ethernet is working on the reader itself, not only on your device. See does a smart reader need Wi-Fi.
  3. The device running Collect is on the same local network as the reader.
  4. The reader is registered to a Location on the same Stripe account you’re using in Collect, and in the same mode. A reader registered in live mode doesn’t appear while Collect is in Test Mode.
  5. Restart the reader, wait until it’s back on the network, then scan Internet again in Collect.

A reader that another device is already using won’t connect to a second one. Disconnect it there first. See two devices and one reader.

Bluetooth readers

An M2 or WisePad 3 isn’t registered and doesn’t connect to your network, so the Dashboard’s online and offline status doesn’t apply to it. Collect finds it when you scan Bluetooth and the reader is on and nearby. If the Bluetooth scan finds nothing, see connection troubleshooting.

Collect for Readers

With Collect for Readers, Collect runs on the S700, S710, or T600 itself. It doesn’t pair to another device, so it won’t show up as a reader for another device to connect to. That’s expected.

Can't find what you're looking for?

For specific account questions, disputes, or technical issues, Stripe's support team can help you directly.

Contact Stripe Support →