← Back to all FAQs Card Readers

Does a Stripe smart reader need Wi-Fi?

A smart (internet) reader needs its own Wi-Fi or Ethernet connection. Bluetooth readers don’t.

Internet readers (WisePOS E, Stripe Reader S700, S710, and T600) connect to Stripe over Wi-Fi or Ethernet. The device running Collect must be on the same local network as the reader. In Collect you scan Internet. Before that scan can find the reader, it has to be registered to a Location.

Bluetooth readers (M2, WisePad 3) don’t join your Wi-Fi. They connect to the device running Collect over Bluetooth and use the device’s internet connection. You scan Bluetooth.

Tap to Pay uses the device’s own connection. There’s no reader network to set up.

Network requirements

Stripe’s network requirements for smart readers include:

  • A password-protected Wi-Fi network (WPA, WPA2, or WPA3) or Ethernet, using IPv4. Wi-Fi 6 isn’t supported.
  • No browser sign-in page. Guest Wi-Fi and hotel networks that ask you to accept terms usually won’t keep a reader online.
  • Use Wi-Fi or Ethernet, not both at the same time.

Smart readers have built-in network diagnostics. The S710 can also use cellular. For Ethernet, the T600 uses Stripe’s Reader Hub.

If the Dashboard shows the reader offline, see why a reader shows offline.

Can't find what you're looking for?

For specific account questions, disputes, or technical issues, Stripe's support team can help you directly.

Contact Stripe Support →